Telehandler — 44 ft Lift Height
Lot 01Telehandlers2 units in the yardDelivered within 80 km
Stock photo — not this unit. These show the same model, not the machine in our yard. Ask and we will send photographs of the actual unit.
Illustrations — not photographs. These 3 frames are generated pictures of the same class of machine, built from this unit’s own specification rows. They show what the machine is and what it does. They are not photographs — of this unit, or of our yard. Ask and we will send photographs of the actual machine.
Photograph: Manufacturer image of a JCB 550 Loadall
What this machine does
Load chart
Top of the lift
- Max lift height
- 44 ft 3 in (13.5 m) — forks, machine level on firm ground
- Max lift capacity
- 8,000 lb (3,629 kg) — conservative pending load-chart confirmation; this machine may be rated higher
One point is published, and no more. The amber line is the top of the lift, to scale. The yard publishes no capacity at height, and none is drawn. Read the load chart in the cab before you lift.
Not drawn, because the yard has not confirmed it against the data plate: Max forward reach, Capacity at max reach. Ask and we will go and read it.
Specifications
- Engine
- 100 hp 4-cylinder turbo diesel
- Torque
- 306 lb-ft @ 1,400 rpm
- Wheelbase
- 9 ft 6 in
- Attachment
- Standard forks included
- Load chart
- Supplied at dispatch for the specific machine. Capacity falls as the boom extends and lowers — always work from the chart in the cab.
- Transmission
- 4F/4R powershift
- Fuel capacity
- 33 gal (125 L)
- Overall height
- 8 ft 5 in
- Max lift height
- 44 ft 3 in (13.5 m) — forks, machine level on firm ground
- Operating weight
- 24,000 lb (10,886 kg)
- Width over tires
- 8 ft 0 in
- Max forward reach
- 30 ft 9 in (9.39 m) — confirm at dispatch from the load chart
- Max lift capacity
- 8,000 lb (3,629 kg) — conservative pending load-chart confirmation; this machine may be rated higher
- Length to fork face
- 20 ft 5 in
- Capacity at max reach
- 2,500 lb (1,133 kg) — confirm at dispatch from the load chart
About this machine
Rough-terrain telescopic handler — the workhorse for framing, roofing, truss setting and yard loading. Four-wheel drive with multiple steer modes for tight sites, powershift transmission, and a 30 ft forward reach for placing loads over obstacles. Rated capacity is confirmed from the machine's own load chart at dispatch. Delivered to your jobsite anywhere in Greater Edmonton.
When it is free
2 units behind this lot, so a day marked LIMITED still has one free.
OCTOBER 2026
NOVEMBER 2026
- free
- turnaround — cleaning and inspection between rentals
- booked
- in the past
Pick the pickup day
What the rate covers
- Included in the published rate
- Costs extra priced, and on your quote before you commit
- Not supplied not available from the yard at any price
- IncludedAttachmentStandard forks included
- IncludedEngine hours8 engine hours per rental day, metered by the telematics unit in the machine. Hours beyond the allowance are billed at the overage rate on your agreement.
- Costs extraDeliveryDelivered within 80 km of the yard · $175.00 each way · $2.75/km beyond the first 15 km, each way. Pickup from the yard is free.
- Costs extraDamage WaiverOn every order. Declinable with a valid certificate of insurance.12%of the rental
- Costs extraEnvironmental FeeOn every order.$75.00
- Costs extraGSTOn the rental and the fees.5%
- Costs extraCleaningCharged at check-in, and only if it applies.$95.00
- Costs extraFuelCharged at check-in, and only if it applies.$2.10per litre
- Costs extraRefuelling ServiceCharged at check-in, and only if it applies.$75.00
- Costs extraEngine hours past the allowanceMetered by the telematics unit in the machine, not estimated from the calendar.$56.06per hour
- Costs extraSecurity depositA hold placed on your card the day before pickup — an authorization, not a charge, so the money is never taken. Released once the machine is back and checked in; your bank may take a few days to show that.$1,500.00hold
- Not suppliedAn operatorThe rate is the machine on its own. You put a trained, competent person in the seat — the yard does not send one, and there is no add-on that changes that.
- Not suppliedInsuranceThe damage waiver is not insurance. It reduces what you owe for accidental damage; it does not cover theft, misuse or an untrained operator, and it does not stand in for the policy behind your certificate.
Delivery, add-ons and the waiver
What you bring
- Certified operatorA trained, competent operator. You certify at checkout that whoever runs this machine is trained and competent on this machine class.
- Certificate of insuranceA current certificate of insurance naming Cold Steel Rentals. We verify it before the machine is released — a COI is required on every rental.
- Staff approvalYour dates are held the moment you reserve. The yard checks your insurance and licence before the machine leaves — that is the only step that is not instant.
Things to know
Who may run it
- Every person who runs this machine has to be trained and competent on this class of machine.
- You certify that yourself at checkout — the yard does not test you — and it is a clause of the agreement you sign.
- Occupational health and safety law in Alberta puts that on you.
Insurance
- A certificate of insurance naming Cold Steel Rentals as additional insured and loss payee, on every rental without exception.
- 12%of the rental— damage waiver, on every order. A valid certificate on file is the one thing that takes it off.
- The yard reads the certificate before the machine is released. Send it at checkout or have your broker email it.
Cancelling
- 24hor more before pickup — cancelling costs nothing.
- 48hor more if we are delivering — a truck is committed sooner.
- Inside that window, part of the rental is kept.